New host to test RADVD on R2

This commit is contained in:
root 2020-08-20 21:37:55 +10:00
parent 19875ff5db
commit 089621efed
6 changed files with 121 additions and 0 deletions

24
H13/config Normal file
View File

@ -0,0 +1,24 @@
# Template used to create this container: /usr/share/lxc/templates/lxc-debian
# Parameters passed to the template: -r stretch
# Template script checksum (SHA-1): d5aa397522e36a17c64c014dd63c70d8607c9873
# For additional config options, please look at lxc.container.conf(5)
# Uncomment the following line to support nesting containers:
#lxc.include = /usr/share/lxc/config/nesting.conf
# (Be aware this has security implications)
lxc.apparmor.profile = generated
lxc.apparmor.allow_nesting = 1
# Common configuration
lxc.include = /usr/share/lxc/config/debian.common.conf
# Container specific configuration
lxc.tty.max = 4
lxc.arch = amd64
lxc.pty.max = 1024
lxc.rootfs.path = btrfs:/var/lib/lxc/H13/rootfs
lxc.uts.name = H13
lxc.net.0.type = veth
lxc.net.0.flags = up
lxc.net.0.name = vlan1050
lxc.net.0.veth.pair = h13.1050
lxc.net.0.script.up = /etc/lxc/lxc-openvswitch
lxc.net.0.script.down = /etc/lxc/lxc-openvswitch

View File

View File

5
H13/rootfs/etc/hosts Normal file
View File

@ -0,0 +1,5 @@
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

View File

@ -0,0 +1,13 @@
auto lo
iface lo inet loopback
auto vlan1050
iface vlan1050 inet manual
up ip link set up dev vlan1050
up ip addr add 10.50.1.13/24 dev vlan1050
up ip route add default via 10.50.1.1 dev vlan1050
down ip addr del 10.50.1.13/24
down ip link set down dev vlan1050
iface vlan1050 inet6 auto

View File

@ -0,0 +1,79 @@
#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables.
# See sysctl.conf (5) for information.
#
#kernel.domainname = example.com
# Uncomment the following to stop low-level messages on console
#kernel.printk = 3 4 1 3
##############################################################3
# Functions previously found in netbase
#
# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1
# Uncomment the next line to enable TCP/IP SYN cookies
# See http://lwn.net/Articles/277146/
# Note: This may impact IPv6 TCP sessions too
#net.ipv4.tcp_syncookies=1
# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1
# Uncomment the next line to enable packet forwarding for IPv6
# Enabling this option disables Stateless Address Autoconfiguration
# based on Router Advertisements for this host
net.ipv6.conf.all.forwarding=1
net.ipv4.icmp_ratelimit = 0
net.ipv6.icmp.ratelimit = 0
###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Do not accept ICMP redirects (prevent MITM attacks)
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
#
###################################################################
# Magic system request Key
# 0=disable, 1=enable all
# Debian kernels have this set to 0 (disable the key)
# See https://www.kernel.org/doc/Documentation/sysrq.txt
# for what other values do
#kernel.sysrq=1
###################################################################
# Protected links
#
# Protects against creating or following links under certain conditions
# Debian kernels have both set to 1 (restricted)
# See https://www.kernel.org/doc/Documentation/sysctl/fs.txt
#fs.protected_hardlinks=0
#fs.protected_symlinks=0